top of page

Smart water protection: why builders should put leak detection and shutoff on the plans

Nov 9
8 min read

The house is finished. The owners have moved in, or more likely in Central Oregon, they've closed it up after the holidays and gone home to Seattle or the Bay Area.


Then a washing machine hose lets go. Or a supply line under the guest bath vanity cracks. Or a pipe in the crawl space freezes and splits during a January cold snap.


Nobody is there. The water runs for hours, sometimes days. By the time a neighbor or the property manager notices, the problem isn't a leak anymore. It's subfloor, drywall, cabinets, flooring and possibly mold.


And the first call often goes to the builder.


Water damage is one of the most common and expensive problems a new home will ever have, and most of it is preventable. The right time to plan for it is the same time you plan the plumbing: before the walls close.



Why this is a builder's problem, not just the owner's

Water damage and freezing made up 22.6% of homeowners insurance losses in 2023, according to the Insurance Information Institute. From 2019 through 2023, about one in every 67 insured homes filed a water or freezing claim each year, and the average claim ran about $15,400.


Those are averages. A slow leak behind a finished wall in a custom home with wide-plank floors and built-in cabinetry can go well past that.


For the owner, it's a disaster. For the builder, it's a different kind of problem. Even when the cause is a failed appliance hose or a frozen pipe the owner should have protected, the conversation usually starts with "what's wrong with the house you built?" That's a warranty call, a site visit and a relationship strained at exactly the moment you want a referral.


Smart water protection doesn't make leaks impossible. It makes a small leak stay small.


What a professional water protection system actually does

Good water protection has three layers. Each does a different job.


1. Leak sensors at the likely failure points. Small wireless sensors sit on the floor where water problems start. When a sensor gets wet, the system sends an alert. Common spots:

  • Water heater

  • Washing machine

  • Dishwasher and kitchen sink

  • Refrigerator with an ice maker or water line

  • Bathroom vanities and toilets

  • Mechanical room and any pressure tank or water treatment equipment

  • Crawl space low points


2. Whole-home monitoring on the main line. A floor sensor only knows about water that reaches it. It can't see a pinhole leak inside a wall or a toilet that runs all night. Alarm.com's Water Dragon clips onto the main water line and uses ultrasonic sensing to watch how water moves through the whole house. It flags unexpected flow and hidden leaks, and it monitors pipe temperature so it can warn about a possible freeze before a pipe splits.


3. An automatic shutoff valve. This is the piece that turns an alert into protection. The Alarm.com Smart Water Valve goes on the main supply line. When a leak sensor detects water, the system closes the valve automatically. The owner can also open or close it from the Alarm.com app.


Detection tells you there's a problem. The valve is what stops it. An alert at 2 a.m. or during a flight to Phoenix doesn't help much if nobody can act on it. A valve that closes on its own does.


Why it belongs on the plans

Leak sensors are wireless and can go in any time. The shutoff valve is different. It's a plumbing component on the main line, and where it goes matters.


It has to be plumbed in by a licensed plumber. In Oregon, plumbing work on someone else's home is limited to licensed plumbers. We don't cut into water lines. On our projects, the plumber installs the valve body at rough-in, and we handle the actuator, control unit, programming and integration with the rest of the system. That only works smoothly if both trades know about it before rough-in.


It needs the right spot. The valve is rated for a dry, indoor location downstream of the main shutoff. It needs a standard outlet nearby for its power supply, and it needs to be reachable for service. If nobody plans for it, the main often ends up in a tight crawl space, a buried box outside or a closet that's been finished with no outlet anywhere close.


It has to work with everything else on that line. A few situations need a decision before the valve goes in:

  • Irrigation. Decide whether the shutoff should also stop water to the irrigation system or only to the house.

  • Wells. Many homes on acreage around Sisters, Tumalo, Powell Butte and Terrebonne run on private wells. The plumber decides where the valve sits relative to the pressure tank and treatment equipment.


None of these are difficult problems. They're just much easier to solve on paper than after the drywall is up.


The Central Oregon factor: freezing and empty houses

Two things make water protection more valuable here than in most markets.

Freezing. Plumbing runs through crawl spaces, exterior walls and rooms over the garage. A furnace failure, a power outage or a cold snap while the house sits empty can freeze a pipe overnight. Wireless temperature sensors in crawl spaces and cold rooms send a low-temperature alert well before trouble. Water Dragon adds pipe temperature monitoring on the main line. We covered the full winter setup in our post on Alarm.com products for a Central Oregon winter.

Second homes. A lot of the homes we work on in Sunriver, Black Butte Ranch, Sisters and Brasada Ranch are second homes or short-term rentals. Many sit empty for weeks at a time. In a house nobody's living in, a leak can run until the next visit. For these owners, automatic shutoff isn't a nice extra. It's often the most valuable thing in the system.

How it ties into the rest of the smart home

Water protection works best as part of the same Alarm.com system that runs the home's security, cameras, locks and thermostat. One app, one set of alerts, one company to call.

That opens up some useful automation:

  • An Away scene arms the security system, locks the doors, sets the thermostat to a safe setback temperature and keeps the water protection on watch.

  • Owners can close the valve from their phone before a long trip, or the system can respond to a leak automatically.

  • Leak and freeze alerts come in alongside security alerts, so the owner or the property manager sees everything in one place.

  • Water usage history in the app makes a running toilet or a slow leak easy to spot.

Because Alarm.com panels communicate over cellular, sensor alerts still get through when the home's internet is down. That's a common situation during winter storms here. More on that in our post on cellular backup for security systems.

A word on insurance

Some insurance carriers offer premium credits for homes with automatic water shutoff, and for some high-value and seasonal homes a shutoff is becoming something carriers ask about before they'll write the policy. Requirements vary by carrier.

We don't promise a discount, and you shouldn't either. If the owner is counting on an insurance credit, have them check with their agent before the system is specified.

Where we'd tell you to skip it

We'd rather tell you what isn't worth doing than sell you something that doesn't earn its place.

Don't put a sensor under every sink in the house. Cover the appliances and fixtures most likely to fail and the places water collects. More sensors means more batteries to change and more alerts, not much more protection.

Don't install a shutoff valve with no way to get to it. A valve buried behind a finished wall or at the far end of a crawl space with no outlet is a service problem waiting to happen. If the home can't give it a reasonable location, we'll say so and find another way.

Don't treat automatic shutoff as a substitute for good plumbing. It limits damage. It doesn't fix a bad install, poorly insulated pipes or a crawl space that gets too cold. Water protection works on top of good building practice, not instead of it.

The builder's water protection checklist

Before rough-in plumbing is finished, confirm:

  • The owner has decided on water protection, or at least a valve location has been planned for later.

  • The plumber knows a smart shutoff valve is going on the main line and where.

  • The valve location is indoor, dry, downstream of the main shutoff, accessible and has an outlet nearby.

  • Irrigation and well equipment have been accounted for in the valve placement.

  • Leak sensor locations are planned for the water heater, laundry, kitchen, baths, mechanical room and crawl space.

  • Temperature sensor locations are planned for crawl spaces, rooms over the garage and other cold spots.

  • The water protection is part of the same system as security, so one app covers everything.

  • The owner (or their property manager) knows how alerts work and who gets them before move-in.

At handoff, the system should be tested: sensors trip, alerts arrive, the valve closes and reopens, and the owner knows what to do when the app tells them something's wrong.

Frequently asked questions about smart water protection in new construction

Should a new custom home have an automatic water shutoff valve?

It's worth considering on every new build, and we'd recommend it for second homes, rentals and any home that will sit empty for stretches of time. At minimum, plan a valve location during rough-in so it's easy to add later.

Who installs a smart water shutoff valve?

In Oregon, a licensed plumber installs the valve on the water line. A security and smart-home integrator like SecuraCore installs the actuator and control unit, adds the leak sensors and connects everything to the home's Alarm.com system.

What's the difference between a leak sensor and a shutoff valve?

A leak sensor detects water where it sits and sends an alert. A shutoff valve stops the water supply. Paired together, the system closes the valve automatically when a sensor gets wet.

Can a smart water system warn about frozen pipes?

Yes. Wireless temperature sensors can alert the owner when a crawl space or cold room drops too low, and Alarm.com's Water Dragon monitors pipe temperature on the main line and alerts when conditions point to a possible freeze.

Can water protection be added after the home is built?

Yes. Leak sensors and Water Dragon install easily in a finished home. A shutoff valve can be added later too, but it depends on where the main line is and whether there's an accessible spot with power. Planning it during construction removes that guesswork.

Make water protection part of the build

A home that can protect itself from water damage is a better home to hand over. The owner gets peace of mind. The builder gets fewer warranty calls and a better story to tell the next client.

It takes very little: a conversation with the owner, a valve location on the plans, coordination with the plumber and a few sensors in the right places. The cheapest water damage to fix is the kind that never spreads past the drip pan.

Building or remodeling in Central Oregon? Bring SecuraCore in before rough-in. We work with custom builders, general contractors, remodelers, architects and designers in Bend, Redmond, Sisters, Sunriver, Powell Butte, Black Butte Ranch and across Central Oregon on home security, smart-home automation, water protection and the network behind it all.

Send us your plans. We'll mark up where the water protection, security and network infrastructure should go, and we'll coordinate with your plumber and electrician. Connect with SecuraCore about your next project, call us at (541) 241-8114, or see how we work with design and build partners.

Planning the rest of the low-voltage work? Read our builder guides on security pre-wiring and new-construction Wi-Fi.

SecuraCore: Technology made simple. More Central Oregon smart home advice on our blog.

General planning guidance, not code interpretation, plumbing or insurance advice. Insurance statistics are from the Insurance Information Institute (2019–2023 data). Valve placement and plumbing work must follow the Oregon Plumbing Specialty Code and be performed by a licensed plumber; confirm requirements for a specific project with the building official.

Comments


bottom of page