top of page

Who still has a key? Why Central Oregon businesses are switching to smart access control

Nov 9
8 min read

Think about how many people have a key to your business.


Current employees. Former employees. The cleaning crew. A contractor who needed in six months ago and never brought the key back. Maybe the manager who left last spring.

Now the harder question: do you know exactly who can get into your building, which doors they can open, and when?


For most businesses, the honest answer is no. Keys get lost, copied and handed around. Shared door codes don't stay private for long. And when someone leaves, rekeying rarely makes it to the top of the list.


There's a better way to run your doors. At SecuraCore, we design and install commercial security and technology for businesses across Bend and Central Oregon, and for access control we build on Alarm.com for Business: cloud-managed doors, credentials and schedules, tied into the same app as your cameras and alarm.



What smart access control actually does

Access control decides three things: who can get in, which doors they can open, and when.

Instead of relying on keys, people use electronic credentials: a key card, a fob, a PIN, or a compatible smartphone. Managers run the whole thing from the Alarm.com app or website.


In practice, that looks like this:

  • Employees get in during their scheduled shifts.

  • Managers can reach the office and stockroom after hours.

  • The cleaning crew gets the back door on Tuesday and Friday evenings, and nothing else.

  • A contractor gets a credential that switches itself off when the job ends.

  • The owner unlocks the front door from a phone for a vendor who showed up early.


Everyone gets the access their job needs, and no more. When schedules or staff change, the permissions change with them.


Five ways it makes running a business easier

1. Former employees stop being a security question

When someone leaves, what happens to their key? Even if it comes back, you can't know whether a copy exists. If it doesn't come back, you're paying a locksmith.


With electronic credentials, you disable that person's access in the app, and their card, fob or phone stops working at every door it used to open. No rekeying.


That matters here. Plenty of Central Oregon businesses staff up for summer and again for ski season, then scale back. Adding twenty seasonal employees, or turning them all off on the same day, takes minutes. Alarm.com supports bulk user management, and credentials can be set to expire on a date you choose.


2. Access by door, by person and by hour

Not everyone needs the whole building. A retail associate needs the front door and stockroom. A manager also needs the office. A delivery driver needs one door during one window.


Alarm.com handles this with access plans: which doors, which people, which times. Say your shop opens at 8 a.m. Staff can get in from 7:15, the cleaning crew gets a separate evening window, and the office stays locked to everyone but managers. When holiday or winter hours change, you change the schedule, not the locks.


3. Your phone can be your key

People forget badges. They rarely forget their phones.


With Alarm.com's mobile credentials, you send an employee an invitation by text, they install the app, and their iPhone or Android phone works as their badge. They hold it near the reader and the door opens. Mobile credentials work with Alarm.com's own readers, so plan the reader choice with this in mind.


Cards, fobs and PIN codes still work too, and you can mix them. A professional office might go all-phone. A warehouse crew in gloves might be better off with a rugged fob.


4. You know what happened at your doors

A key can't tell you this: someone used their credential at the back door at 10:47 p.m.


Access control logs every event. You can see who badged in and when, pull access history reports, and get alerts for the things you care about, like a credential used outside its schedule or a door left open.


One honest limitation: an access event tells you which credential was used, not necessarily who walked through. If a badge gets shared or someone holds the door, the log won't show it. That's why we pair access control with cameras (more on that below).


5. You can open the door without being there

A delivery shows up while you're with a client. A contractor arrives early. A vendor needs into the equipment room on a Saturday.


From the Alarm.com app or website, authorized users can lock, unlock or briefly release a door from anywhere. With a compatible video doorbell or door station, you can see and talk to the person first, then let them in.


Better together: access control, cameras and your alarm

Access control on its own is useful. It gets a lot more useful on the same platform as your cameras and intrusion alarm.


Picture a commercial building in Redmond. You get an alert that a credential was used at a restricted door after hours. With an integrated Alarm.com camera system, you open the clip from that moment and see who was actually there. Now you know who, not just whose card.


The alarm side ties in too. The first employee to badge in can automatically disarm the system. A double tap of the card on the way out can arm it. No codes on a sticky note behind the counter, and fewer false alarms from someone who forgot to disarm.


On one app, you get:

  • Door access and credentials

  • Cameras and recorded video

  • The intrusion alarm

  • Activity history and alerts

  • Remote door control

  • Automatic opening and closing routines


One system to learn, instead of three that don't talk to each other.


Where it makes the biggest difference in Central Oregon

You don't need a hundred doors. Most of the businesses we work with start with one or two that matter.


Restaurants, breweries and retail. Seasonal hiring, deliveries and turnover make keys a mess. Access control keeps back doors, offices and inventory rooms limited to the people who need them.


Professional offices and medical practices. Law firms, financial offices and clinics often have rooms that need tighter control. Role-based access keeps those rooms locked without slowing down everyone else. It's one piece of protecting sensitive areas, not a substitute for your privacy and compliance obligations.


Shops, warehouses and outbuildings. Tools, equipment and inventory are expensive. Paired with cameras, access control tells you who was in the building and what they did there. For a shop or barn out past Redmond, Terrebonne or Powell Butte with no wired internet, Alarm.com offers a cellular connector for access control, so the door doesn't depend on a network that isn't there.


Property managers and multi-tenant buildings. Tenants come and go. Electronic credentials let you add and remove people without handing out permanent keys, and Alarm.com's video intercom features let tenants see a visitor and unlock the door from their phone.


Businesses with more than one location. If you run sites in Bend, Redmond and Sisters, you can manage doors, schedules and users for all of them from one dashboard instead of three separate systems.


Do you need a new building?

No. New construction is the easiest time, because wiring, door hardware and readers can be planned before the walls close. But most existing commercial buildings can be upgraded too, sometimes by reusing compatible hardware, sometimes by retrofitting specific doors.


What matters is evaluating each door properly. Not every door needs the same hardware, and not every lock can be electrified. A good design looks at:


  • The doors, frames and existing hardware. Storefront glass, hollow metal and wood doors each take different hardware.

  • Safe exit. Electrified locks on exit doors have to let people out freely, and they're subject to building and fire code. This is where shortcuts cause real problems.

  • Power outages. Decide door by door whether it should unlock or stay locked when the power goes out, and plan backup power. Winter storms here make this a practical question, not a theoretical one.

  • Weather. Readers on exterior doors deal with snow, ice, sun and freezing nights. Mount them where they're protected and use hardware rated for the conditions.

  • Network and power. Where the panel lives, how it connects, and what happens when the internet drops.


Low-voltage security work in Oregon is licensed and permitted, and the door hardware often has to be coordinated with your landlord, locksmith or building official. That's part of the job we handle.


Where we'd tell you to skip it

We'd rather sell you the right system than the biggest one.


Don't put a reader on every interior door. Start with the exterior doors and the one or two rooms that hold something worth protecting. Most businesses need fewer controlled doors than they expect.


A small shop may not need commercial readers yet. If you have one door and a few long-term employees, a commercial-grade smart lock on the same Alarm.com system can give you user codes, schedules and history for less. You can add readers when you grow.


Don't electrify a door you haven't checked. Fire-rated doors and exit doors have rules. If someone is quoting you a lock without asking about them, keep looking.


What about homes and second homes?

The same idea works at home. Alarm.com supports smart locks, garage door control, individual user codes and remote access for houses.


For a Central Oregon homeowner, that might mean giving the housekeeper a code that only works on Thursdays, checking that the door is locked from the airport, or getting a notice when the kids get home. For a second home in Sunriver or Black Butte Ranch, it means knowing exactly who came and went while you were away.


Residential smart locks are a different product line from Alarm.com's commercial access control, but the principle is the same. You should control who gets into your property without handing out permanent keys. Our home security page covers the residential side, and our post on Alarm.com products for Central Oregon homes goes further.


Why the design matters more than the hardware

An access control system is only as good as its design. The right reader on the wrong door, or the wrong permissions on the wrong employee, creates headaches and gaps.


So we start with how your business actually runs. Who needs access? Which areas stay restricted? What should happen when the first person arrives in the morning? How do deliveries, visitors and contractors get in?


Then we design around the answers: equipment selection, installation, user permissions, camera and alarm integration, and training for whoever will run it. Whether it's one office door or several locations, the goal is the same: a more secure building, smoother operations, and technology your team can actually manage.


Frequently asked questions about business access control

Can I remove a former employee's access right away?

Yes. Disable their user in the Alarm.com app or website and their card, fob, PIN or phone credential stops working at every door. You can also set credentials to expire on a specific date ahead of time.


Can employees use their phones instead of key cards?

Yes. Alarm.com mobile credentials turn a compatible iPhone or Android phone into an access badge. They work with Alarm.com's own readers, so that's part of the equipment decision. Cards, fobs and PINs can run alongside them.


Does access control work with my security cameras and alarm?

On the Alarm.com platform, yes. You can pull up video from the moment a door was used, and set the first badge-in of the day to disarm the alarm and a double tap on the way out to arm it.


Can access control be added to an existing building?

In most cases. Many doors can be retrofitted, and compatible existing hardware can sometimes be reused. Each door needs to be checked for its hardware, power, and safe-exit requirements.


What happens to the doors if the power or internet goes out?

That's decided during design. Each door is set to either unlock or stay locked on power loss, and backup power keeps the system running through short outages. Cellular communication can keep a system connected when the internet is down.


Take control of who comes and goes

You shouldn't have to wonder who still has a key, whether a former employee can get in, or how you'll let a contractor in while you're across town.


Access control gives you flexibility, visibility and control over the spaces that matter. With Alarm.com and a system designed and installed by SecuraCore, your doors become one less thing to think about.


Know who has access. Control when they enter. Protect what matters.

Ready to upgrade your access control? SecuraCore designs and installs integrated security and access control for businesses in Bend, Redmond, Sisters, Sunriver and across Central Oregon. Whether it's one door or a full system with cameras and intrusion protection, we'll design around how your business works.

Contact SecuraCore to schedule an access control consultation, or call us at (541) 241-8114. We'll take care of it.

Comments


bottom of page